If you're thinking of applying for this job, make sure your resume is up-to-date and includes at least some of the keywords contained within the advert.Click Here to download our Expert Mining Resume Guide and create the best version of your mining resume.
Mackay & Coalfields, Queensland location.This is a Bowen Basin job located in the Mackay & Coalfields area. Do you live close to this location, or are you willing to FIFO from within Queensland?
You need a Standard 11 Mining Induction to be eligible for this job. If you don't have one and are not sure what this is, click the Standard 11 Mining Induction link further down the page.
Only applicants with real skills should apply. When sending in your application for the job, be sure to highlight the skills you have which are relevant.
See more jobs in the Mine Jobs category.
Operator Coal Mining Level 3 Job, Queensland
Job Advertiser: WorkPac Group
About Our Client
Our client is Australias largest coal miner and exporter, the world’s largest supplier to the sea borne coking coal market and largest coal producer and supplier of metallurgical coal. The client has several mine sites across the Bowen Basin consisting primarily of open cut mines.
About the Role
WorkPac are currently seeking a skilled and experienced Truck Operators to commence at a mine near Coppabella. You will be working a 7/7 Roster and there is also a bus service available from Mackay.
Duties & Responsibilities
Operate CAT 777s, 785, 789, 793s
Pre Start Checks
Skills & Experience
RII/Training Transcript for proof of operating
2 years Operating Experience
Coal Board Medical
Standard 11 Induction Training or equivalent
Right to work within Australia
If candidate only has 777 experience a minimum of 5 years is required.
About WorkPac
WorkPac is Australias leading, privately owned recruitment provider to the mining, construction, engineering,
Note: This is a sample job advertised by WorkPac Group. For a more detailed overview of this job, click the link below to go the WorkPac Group website.
Category: Mining, Oil & Gas
Published Date: 24/05/2019
Job Advertiser: WorkPac Group
Workpac Group Operator Coal Mining Level 3 Job in QLD
About the Bowen Basin mining region, Queensland.
The Queensland Bowen Basin contains the largest coal reserves in Australia. This major coal producing region contains one of the world’s largest deposits of bituminous coal.
The Basin contains much of the known Permian coal resources in Queensland including virtually all of the known mineable prime coking coal. It was named for the Bowen River, itself named after Queensland’s first Governor, Sir George Bowen.
The Bowen Basin covers a total area of over 60,000 square kilometres and is located in Central Queensland; running from Collinsville to Theodore. The entire region is home to many coal mines operated by multiple mining companies.
Here's a list of mining companies with operations in the Bowen Basin.
- Peabody Energy Australia Pty Ltd
- New Hope Corporation Limited
- QCoal Pty Ltd
- Hail Creek Holdings Pty Ltd
- Mt Rawdon Operations Pty Ltd
- Glencore Coal Queensland Pty Limited
- Fitzroy Queensland Resources Limited
- Conquest Mining Limited
- Ravenswood Gold Pty Ltd
- BHP Coal Pty Ltd/li>
- Baralaba Coal Company Pty Ltd
- Anglo American Metallurgical Coal Pty Ltd
- Santos Limited (JV with Santos Limited, Petronas Total and Kogas)
- TEC Coal Pty Ltd
- TerraCom Australia
- Coronado Curragh Pty Ltd
- Yarrabee Coal Company Pty Ltd
For a more detailed view of the above list, here's the link to Queensland State Development mines list
Caterpillar Haul truck 777
The Caterpillar 777 is a 100-ton haul truck, typically used in open pit mining, manufactured by Caterpillar Inc. The first model of Caterpillar 777 was introduced in 1974. Its diesel engine is capable of putting out 870 horsepower. The 777D, introduced in 1996, was powered by a 938-horsepower diesel.
This truck is one of the entry-level haul trucks most new operators will learn on. Once competent, they will move up to the larger 785, especially when working on a coal mining site.
Caterpillar Haul truck 785
The Caterpillar 785 Haul Truck, Dump Truck or off-road truck as they are called in the U.S. are still used across the world in open-cut mining operations. This huge truck has proven it’s worth for many years and has often been the entry-level truck for new operators.
Progressing when competent, operators move up to the larger CAT 793 and CAT 797 truck, giving them the confidence and ability to handle larger load capacities on a range of challenging mine sites.
One of the biggest advantages you can get if you are looking to learn how to drive these big machines is to get to know the finer details.
Learn more about the Caterpillar 785D mining haul truck here.
Caterpillar Haul truck 793
The 793F has a load cpacityof 226.8 ton (US) and a top speed of 60 kilometres an hour. It's a turbocharged air-to-air aftercooled diesel engine that has enhanced power management capability for maximum hauling performance. The C175-16 is a 16-cylinder, four-stroke design that uses long, effective power strokes for optimum efficiency.
The 793F, is an autonomous-driven truck. Over 100 793F trucks are now operating via Command for hauling, the Cat autonomous truck operations system, which is a part of Cat MineStar™
Read more about the CAT 793 automomous mining dump truck on our website.
Caterpillar Haul truck 789
The Caterpillar 789 dump truck is typically used in open pit mining. The 789 has a capacity of 177 tonnes, and its engine can produce 1770 horsepower.
There are hundreds of CAT 789 dump trucks on various mine sites in Australia; working hard in open-cut coal mines as well as hauling raw iron ore dirt across the open, dusty mine sites of Western Australia.
Read more about the CAT 789 mining dump truck on our website.
Resources and Infrastructure Industry (RII)
Commonly refered to as Black Coal Competency (BCC), the RII competency is one that can be attained by an operator who has previously worked in the industry and has completed a number of operating hours on various types of machinery.
RII competency is granted to prove correct and safe operation of mine site machinery. It is a very useful qualification to have, as it confirms the operator has the required experience and expertise.
Find out more about RII Competencies here
You can transfer your nationally recognised civil Excavator, Front End Loader or Dozer tickets only to RII Black Coal Competencies.
