See more jobs in the Mine Jobs category.
Operator Coal Mining Level 3 – WorkPac Group
About Our Client
Our client is Australias largest coal miner and exporter, the world’s largest supplier to the sea borne coking coal market and largest coal producer and supplier of metallurgical coal. The client has several mine sites across the Bowen Basin consisting primarily of open cut mines.
About the Role
WorkPac are currently seeking a skilled and experienced Truck Operators to commence at a mine near Coppabella. You will be working a 7/7 Roster and there is also a bus service available from Mackay.
Duties & Responsibilities
Operate CAT 777s, 785, 789, 793s
Pre Start Checks
Skills & Experience
RII/Training Transcript for proof of operating
2 years Operating Experience
Coal Board Medical
Standard 11 Induction Training or equivalent
Right to work within Australia
If candidate only has 777 experience a minimum of 5 years is required.
WorkPac is Australias leading, privately owned recruitment provider to the mining, construction, engineering,
Dump Truck mining Jobs in Queensland by WorkPac Group
Published Date: 24/05/2019
Job Advertiser: WorkPac Group
Note: this job may or may not be still available.
Job Description: Operator Coal Mining Level 3 job in the mines in Queensland
This is a sample Regional Queensland WorkPac Group mining and resource sector job from WorkPac Group, who are a leading labour hire company in Australia. They continually advertise a wide range of jobs for workers with experience as a Operator Coal Mining Level 3.
How to apply for the WorkPac Group Operator Coal Mining Level 3 job
There are many other jobs in the mines for Operator Coal Mining Level 3. Here is a direct link to view similar mine jobs where applications can be made directly from the link provided.
Category: Mining, Oil & Gas
Click Here to download our Expert Guide Becoming a Dump Truck Driver
About the Bowen Basin
The Bowen Basin contains the largest coal reserves in Australia. This major coal producing region contains one of the world’s largest deposits of bituminous coal.
The Basin contains much of the known Permian coal resources in Queensland including virtually all of the known mineable prime coking coal. It was named for the Bowen River, itself named after Queensland’s first Governor, Sir George Bowen.
The Bowen Basin covers an area of over 60,000 square kilometres in Central Queensland running from Collinsville to Theodore and is dotted with many coal mines operated by multiple mining companies.
Caterpillar Haul truck 777
The Caterpillar 777 is a 100-ton haul truck, typically used in open pit mining, manufactured by Caterpillar Inc. The first model of Caterpillar 777 was introduced in 1974. Its diesel engine is capable of putting out 870 horsepower. The 777D, introduced in 1996, was powered by a 938-horsepower diesel.
This truck is one of the entry-level haul trucks most new operators will learn on. Once competent, they will move up to the larger 785, especially when working on a coal mining site.
Caterpillar Haul truck 793
The 793F has a load cpacityof 226.8 ton (US) and a top speed of 60 kilometres an hour. It's a turbocharged air-to-air aftercooled diesel engine that has enhanced power management capability for maximum hauling performance. The C175-16 is a 16-cylinder, four-stroke design that uses long, effective power strokes for optimum efficiency.
The 793F, is an autonomous-driven truck. Over 100 793F trucks are now operating via Command for hauling, the Cat autonomous truck operations system, which is a part of Cat MineStar™
Read more about the CAT 793 automomous mining dump truck on our website.
Caterpillar Haul truck 789
The Caterpillar 789 dump truck is typically used in open pit mining. The 789 has a capacity of 177 tonnes, and its engine can produce 1770 horsepower.
There are hundreds of CAT 789 dump trucks on various mine sites in Australia; working hard in open-cut coal mines as well as hauling raw iron ore dirt across the open, dusty mine sites of Western Australia.
Read more about the CAT 789 mining dump truck on our website.
Resources and Infrastructure Industry (RII)
Commonly refered to as Black Coal Competency (BCC), the RII competency is one that can be attained by an operator who has previously worked in the industry and has completed a number of operating hours on various types of machinery.
RII competency is granted to prove correct and safe operation of mine site machinery. It is a very useful qualification to have, as it confirms the operator has the required experience and expertise.
You can transfer your nationally recognised civil Excavator, Front End Loader or Dozer tickets only to RII Black Coal Competencies.