Dump Truck Operator mining jobs in Queensland - iMINCO Mining Training Information

Dump Truck Operator mining jobs in Queensland

Mining Dump Truck Operator Jobs iMINCO Bown Basin

WorkPac Banner Logo

Dump Truck Operator – WorkPac Group

About the Role
Reporting to the production superintendent, you will operate mobile plant equipment, consisting of CAT 793 and Komatsu 730 Haul Trucks.

This is a drive in drive out (DIDO) role for an open cut coal mine in the Banana Shire situated 2 hours South West from Rockhampton and 7 hours North West from Brisbane.

Duties and Responsibilities
Operate mobile plant equipment, consisting of CAT 793 and Komatsu 730 Haul Trucks.
Work Lifestyle roster (4/5, 5/4, 5/5) including PJ Day
12.75 Hour Shifts
Pre-start checks

Skills/Experience
Minimum 6 months experience operating Mechanical Dump Truck CAT 793 or Electric Dump Truck Komatsu 830
MUST Have SSE/Delegate Signed Skills List or Unsigned Skilled List Supported by RII's [...Learn about RII's]
Experience operating under the P&H Electric Rope Shovel on the CAT Trucks is desired
Current Drivers Licence
Current Coal Board Medical or willing to Obtain
Current Standard 11 *Standard 11 Training* or willing to obtain.
A medical including dru

Dump Truck mining Jobs in Queensland by WorkPac Group

Published Date: 24/05/2019
Job Advertiser: WorkPac Group

Apply for the Dump Truck Operator job on the WorkPac website here: Dump Truck Operator

Note: this job may or may not be still available.
————————————————————————————————————————
Job Description: Dump Truck Operator job in the mines in Queensland
————————————————————————————————————————

This is a sample Regional Queensland WorkPac Group mining and resource sector job from WorkPac Group, who are a leading labour hire company in Australia. They continually advertise a wide range of jobs for workers with experience as a Dump Truck Operator.

How to apply for the WorkPac Group Dump Truck Operator job

Apply for the Dump Truck Operator job on the WorkPac Group website here: Dump Truck Operator

There are many other jobs in the mines for Dump Truck Operator. Here is a direct link to view similar mine jobs where applications can be made directly from the link provided.

> Find similar mining jobs on the iMINCO website.
> Find similar jobs on WorkPac Group website.

Category: Mining, Oil & Gas

iMINCO Mining Information logo

Caterpillar Haul truck 793

Caterpillar Haul truck 793

The 793F has a load cpacityof 226.8 ton (US) and a top speed of 60 kilometres an hour. It's a turbocharged air-to-air aftercooled diesel engine that has enhanced power management capability for maximum hauling performance. The C175-16 is a 16-cylinder, four-stroke design that uses long, effective power strokes for optimum efficiency.

The 793F, is an autonomous-driven truck. Over 100 793F trucks are now operating via Command for hauling, the Cat autonomous truck operations system, which is a part of Cat MineStar™

Read more about the CAT 793 automomous mining dump truck on our website.

Komatsu 830E Haul Truck

The Komatsu 830E is an ultra class dump truck used in Australian open pit mining operations an is designed and built in Peoria, Illinois by Komatsu America Corporation (parent company is the Japanese held company Komatsu Ltd.

The Komatsu 830E is a beast, with 231,000 kilogram capacity (255 short tons). Although this is a big truck, the 830E's load capacity is about 66% the capacity of the Liebherr T 282C and Caterpillar 797B.

This is an electric truck and is being featured in many new mining operations as well established mines in WA and QLD.

The electric drive system is very different fromt the transmission/differential drive of traditional trucks. The diesel engine is connected to a GE traction alternator with high voltage cables transfering electricity to the two wheel motors at the rear of the truck.

Read more about the KOMATSU 830E mining dump truck on the Komatsu website



Resources and Infrastructure Industry (RII)

Commonly refered to as Black Coal Competency (BCC), the RII competency is one that can be attained by an operator who has previously worked in the industry and has completed a number of operating hours on various types of machinery.

RII competency is granted to prove correct and safe operation of mine site machinery. It is a very useful qualification to have, as it confirms the operator has the required experience and expertise.

Find out more about RII Competencies here

You can transfer your nationally recognised civil Excavator, Front End Loader or Dozer tickets only to RII Black Coal Competencies.

Email this job to yourself for future reference

Add your email address and name to get the details

Email:
Name: